Support
Sub Categories
The key benefit of a good tripod is its stability, robustness and the torsional rigidity. With this, durability is not the only argument for the original tripod made by Leica Geosystems. Other substantial benefits are the height stability under load and the minimal horizontal drift. Also not to be underestimated are advantages such as long life, optimal vibration dampening, water resistance, outstanding behaviour in solar radiation and their weight in relation to load-bearing capacity.
Large room? No right angles? Skewed walls? Many details? Difficult to reach? No cause to worry: The Leica 3D Disto measures everything you need. Ladder? Mobile access platform? You can leave them back at base. No tripod on hand? Makes no difference – simply place the 3D Disto on a table or the floor. Levelling up? Not necessary. Photographs for the records? No problem, the in-built camera provides the pictures. New software version 2.0 with improved functionality available from October 2012 onwards!
Seba KMT EST 35 High Voltage discharge probe with built-in resistor ensures controlled and reduced discharge of live cables up to 35 kV. The pole is 50 cm long and weighs only 0.95 kg. Resistor is 10kohm and maximum capacitance is 6 uF. Avoid damage to the cables as a result of direct ground / short circuit. Safe discharging of visual grounding. PS: These rods are available in several sizes with voltages up to 150 kV. Please contact us for more information.
Seba KMT EST 75 High Voltage discharge probe with built-in resistor ensures controlled and reduced discharge of live cables up to 80 kV. The pole is 50 cm long and weighs only 0.95 kg. Resistor is 10kohm and maximum capacitance is 6 uF. Avoid damage to the cables as a result of direct ground / short circuit. Safe discharging of visual grounding. PS: These rods are available in several sizes with voltages up to 150 kV. Please contact us for more information.
FEATURES ● Triangular-shaped design keeps the sections aligned during extension and retraction.● Push button release for stick extension and retraction. ● Telescopic design allows for easy assembly, storage and transportation.● Withstands voltage rating of 100kV from 30cm for 5 minutes. ● Universal end fitting accepts a wide variety of standard attachments.● Highly visible yellow tip section.● Easy-to-replace sections.● Carrying bag included. ● Optional integrated height measurement scale.● Complies with IEC 62193 safety standard. SPECIFICATIONS SEW3300HS-175-3 SEW3301HS-175-4 SEW3302HS-175-5 HS-175-6 SEW3303HS-175-7 SEW3305HS-175-8 SEW3304HS-175-9 Sections 3 4 5 6 7 8 9 Extended length (m) 3.82 5.10 6.42 7.78 9.18 10.62 12.09 Retracted length (m) 1.48 1.53 1.58 1.63 1.68 1.73 1.78 Stick width...
● Single foamed hot stick.● Universal sunrise fitting on the head to fit special tool fittings.● Rated at 100 kV per 300mm (5 minutes).● Can be connected to 275 HP HV proximity detector, 21X HVD capacitive HV detector and 277 HP Non-contact HV detector.● Meets IEC 60855.● Reasonable price.● Accessories
● Single foamed hot stick.● Universal sunrise fitting on the head to fit special tool fittings.● Rated at 100 kV per 300mm (5 minutes).● Can be connected toHV proximity detector, 21X HVD capacitive HV detector and Non-contact HV detector.● Meets IEC 60855.● Reasonable price.● Accessories
Storage Battery Systems Battery Capacity Testers, Check battery condition in seconds, with the battery in service! Test Condition Without Shutting Down Battery. Simultaneously Measure Battery Resistance, Voltage. Comparator Function. Rates Conditions as Pass, Warning, or Fail. Memory and Read Function Compact and Lightweight. RS232 PC Interface