Insulation Resistance Testers Malaysia Distributor
- Air velocity : 0.2 to 20.0 m/s - Air temperature : 0 ℃ to 50 ℃ - Type K/J thermometer : -50.0 to 1300.0 ℃
The new “Pocket” Salt-meter ATA0003-PAL-ES3 Salt meter (salinity) is suitable for inspections carried during the manufacturing process as well as for quality control at food factories. It is the best for the measuring the % concentration of salt in sauces, catsups, seasoning, and soups. The displayed unit is in g/100ml as in the Mohr’s method.
Features: Simple, one button push for on-site, detection and analysis of heavy metals in water No specialized user training Less than 2 minutes to test result EPA Award winning Technology – Meets EPA testing requirements Highly sensitive and selective Test results can be downloaded via USB connection Rechargeable through USB connection Capability to re-sample quickly Reduces time to begin remediation action No harmful reagents, environmentally friendly
The new “Pocket” Salt-meter PAL-ES2 is suitable for measuring salt concentrations at restaurants and school cafeterias, as well as for the nourishment guidance in hospitals, and as teaching material at schools. The displayed unit is in g/100g.
![Featured item Featured item](http://www.insulationtestermalaysia.com/components/com_djcatalog2/themes/default/images/featured.png)
Overview Introducing a frying oil monitor that can be used to periodically check and monitor the quality of oil.This instrument is capable of measuring both TPM (Total Polar Materials), a standard used in Europe as an indicator of the overall quality of frying oil, as well as AV (Acid Value), which indicates changes in cooking oil properties.
True RMS 3000A Voltage Measurement (AFLEX 3002 only) Fast Peak Function(30 μs) MAX/MIN Auto-Power-Off:30 minutes Flexible probe, different from normal clamp meter, can pass through obstacles at will and wind many conducting wires simultaneously, max. diameter 170mm AC Current (45~65Hz,True RMS) Range Range Resolution Accuracy of Readings 30 - 300 A 0.00 - 300A 0.1A 1% of range 300 - 999.9 A 100.0 - 999.9 A 0.1A 1% of range 1000 - 3000A 1000 - 3000 A 1A 1% of range AC Voltage (AFLEX 3002 only, 45~65Hz, True RMS) Range Resolution Accuracy of Readings 3 V - 600 V 0.1V ± 0.5% ± 5dgts General Specification Connector Diameter 23mm Cable Diameter 14mm Cable Length from Probe to Box 170mm Conductor Size 170mm (approx.) Battery Type 1.5V SUM-3*2 Power Consumption 10mA (approx.) Auto - Power - Off 30 minutes LCD update rate 2...
Model AMT - Dewpoint Transmitter 2 Wire Loop Powered Dewpoint Transmitter Overall Range -120°C to +20°C Dewpoint Accuracy ± 2°C Dewpoint AUTOMATIC CALIBRATION Can be Configured for Linear 4-20mA signal in:°C & °F Dewpoint, ppm(v), ppb(v), g/m3, lb/MMSCF Temperature Compensation Failure Diagnostics Long Term Stability Fast Reponse IP 66 / NEMA4X Protection Supplied with Calibration Certificate Traceable to National & International Humidity Standards Model AMT Dewpoint Hygrometer is a two wire 4-20mA loop powered transmitter, used for continuous measurement of humidity in a process gas or compressed air, which will output a linear 4-20mA signal corresponding to the dewpoint temperature. The Model AMT transmitter can also be factory configured to output a 4-20mA linear signal for any other moisture unit e.g. ppm(v), ppm(w), g/m3, lb/MMSCF etc. The Ultra High Capacitance sensing element is long lasting and offers excellent sensitivity, repeatability and response speed. Each unit is supplied with a Certificate of Calibration, traceable to International Humidity Standards, validating accuracy to ±2ºC dewpoint. The transmitter also incorporates an...
AMT-Ex Intrinsically Safe 4-20mA Transmitter 3 Wire Intrinsically Safe Dewpoint Transmitter Ex II 1GD Ex ia IIC T4 Ex iaD 20 T135°C (-20°C ≤ Ta ≤ +60°C) Overall Range: -120°C to +20°C Dewpoint Accuracy ± 2°C Dewpoint AUTOMATIC CALIBRATION Can be configured for Linear 4-20mA signal in: °C & °F Dewpoint, ppm(v), g/m3, lb/MMSCF Temperature Compensation Failure Diagnostics Long Term Stability Fast Response IP66 / NEMA4X Protection Model AMT-Ex Dewpoint Hygrometeris a three wire 4-20mA transmitter, used for continuous measurement of humidity in a process gas or compressed air, which will output a linear 4-20mA signal corresponding to the dewpoint temperature. The Model AMT-Ex transmitter can also be factory configured to output a 4-20mA linear signal for any other moisture unit e.g. ppm(v), ppm(w), g/m3, lb/MMSCF etc. The long lasting sensing element offers excellent sensitivity, repeatability and response speed. Each unit is supplied with a Certificate of Calibration, traceable to International Humidity Standards, validating accuracy to ±2ºC dewpoint. Model AMT-Ex is ATEX certified and provides an Intrinsically Safe Dewpoint Transmitter for...